Aftermarket Tuning News

MTM Gets Ready for Summer with the Audi S3 Cabriolet

MTM Audi S3 Cabriolet

Dropping the top in Wettstetten.

MTM – Motoren Technik Mayer is always up for the challenge of tuning and upgrading any kind of vehicle in the Volkswagen Auto Group’s arsenal. The Audi S3 Cabriolet is no different and they’ve worked their magic on the small convertible just in time to enjoy the remainder of summer.

MTM Audi S3 Cabriolet

The 2.0 TFSI turbocharged inline-four engine powering all four wheels in the Audi S3 Cabriolet is ripe for tuning and is packed with potential. All it takes for the team at MTM is their M-Cantronic software tuning module and 1.5 hours before the 300 horsepower and 280 lb-ft. of torque from the factory gets bumped up to 360 horsepower and 332 lb-ft. of torque. Paired up with a four-pipe stainless steel exhaust system, and the small German convertible becomes a mean little topless monster.

All that added power means more acceleration and speed to put a smile on your face. Speeding from 0-62 mph takes just 4.8 seconds compared to the stock 5.1-second time while top speed goes all the way back to an electronically-limited 155 mph.

MTM Audi S3 Cabriolet

But the MTM Audi S3 Cabriolet isn’t just about added power, it’s meant to handle and stop better than ever before. On the front axle sits a new bespoke MTM brake system with a pair of meaty 380 x 34 mm discs while the rear utilizes the factory system. Those brakes are hidden from plain sight thanks to the customer’s choice of MTM Nardo Edition or Bimoto wheels measuring 8.0 x 18, 8.5 x 18, or 9.0 x 20 fitments with a range of finishes. Finishing off the new chassis are new adjustable coilover systems developed in conjunction with KW to provide the optimal balance of handling, comfort, and center of gravity.

This recipe for fun this summer will cost approximately 62,000 Euros – 13,000 more than the price of the Audi S3 Cabriolet from the factory. Upgrades can also be purchased individually from MTM.

MTM Audi S3 Cabriolet Specifications

Displacement: 2.0 liters
Number of Cylinders: Inline-four
Aspiration: Turbocharged
Maximum Horsepower: 360
Maximum Torque: 332 lb-ft / 450 Nm
-M-Cantronic software tune
-Stainless steel quad exhaust system

Wheels, Brakes, and Suspension:
Wheels: MTM Bimoto or Nardo Edition
Wheel Sizes: 8.0 x 18, 8.5 x 18, to 9.0 x 20
Brakes: Bespoke 380 x 34 mm front discs
Suspension: Adjustable coilovers developed with KW

MTM Audi S3 Cabriolet Gallery

Source: MTM – Motoren Technik Mayer

Would you pay 62,000 Euros for the 360-hp MTM Audi S3 Cabriolet?


Fan Faves

To Top